Link-systems System 1100 Tonnage Monitor Manual do Utilizador descarregar pdf (Página 115)

ERROR CODES

___________________________________________________________________

Error No. Message / Action

10-12

107 Data window 3, channel 4 reverse setpoint too high.

The Data window 3 reverse setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

2) Adjust the indicated setpoint to a setting less

than 125% of the channel rating.

108 Data window 3, chan 1 high setpoint < low setpoint.

109 Data window 3, chan 2 high setpoint < low setpoint.

110 Data window 3, chan 3 high setpoint < low setpoint.

111 Data window 3, chan 4 high setpoint < low setpoint.

The Data window 3 high setpoint of the channel

indicated by the error code is set to a value less

than the low setpoint.

1) Adjust the high or low setpoint so that the high

setpoint is greater than the low setpoint.

112 Data window 4, channel 1 high setpoint too high.

113 Data window 4, channel 2 high setpoint too high.

114 Data window 4, channel 3 high setpoint too high.

115 Data window 4, channel 4 high setpoint too high.

The Data window 4 high setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

2) Adjust the indicated setpoint to a setting less

than 125% of the channel rating.

116 Data window 4, channel 1 low setpoint too high.

1 2 ... 110 111 112 113 114 115 116 117

Sem comentários

Link-systems System 1100 Tonnage Monitor Manual do Utilizador Página 115