Link-systems System 1100 Tonnage Monitor Manual do Utilizador descarregar pdf (Página 114)

ERROR CODES

___________________________________________________________________

Error No. Message / Action

10-11

The Data window 2 high setpoint of the channel

indicated by the error code is set to a value less

than the low setpoint.

1) Adjust the high or low setpoint so that the high

setpoint is greater than the low setpoint.

096 Data window 3, channel 1 high setpoint too high.

097 Data window 3, channel 2 high setpoint too high.

098 Data window 3, channel 3 high setpoint too high.

099 Data window 3, channel 4 high setpoint too high.

The Data window 3 high setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

2) Adjust the indicated setpoint to a setting less

than 125% of the channel rating.

100 Data window 3, channel 1 low setpoint too high.

101 Data window 3, channel 2 low setpoint too high.

102 Data window 3, channel 3 low setpoint too high.

103 Data window 3, channel 4 low setpoint too high.

The Data window 3 low setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

2) Adjust the indicated setpoint to a setting less

than 125% of the channel rating.

104 Data window 3, channel 1 reverse setpoint too high.

105 Data window 3, channel 2 reverse setpoint too high.

106 Data window 3, channel 3 reverse setpoint too high.

1 2 ... 109 110 111 112 113 114 115 116 117

Sem comentários

Link-systems System 1100 Tonnage Monitor Manual do Utilizador Página 114