Link-systems System 1100 Tonnage Monitor Manual do Utilizador descarregar pdf (Página 110)

ERROR CODES

___________________________________________________________________

Error No. Message / Action

10-7

048 Channel 1 high setpoint too high.

049 Channel 2 high setpoint too high.

050 Channel 3 high setpoint too high.

051 Channel 4 high setpoint too high.

The Peak tonnage high setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

2) Adjust the indicated setpoint to a setting less

than 125% of the channel rating.

052 Channel 1 low setpoint too high.

053 Channel 2 low setpoint too high.

054 Channel 3 low setpoint too high.

055 Channel 4 low setpoint too high.

The Peak tonnage low setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

2) Adjust the indicated setpoint to a setting less

than 125% of the channel rating.

056 Channel 1 reverse setpoint too high.

057 Channel 2 reverse setpoint too high.

058 Channel 3 reverse setpoint too high.

059 Channel 4 reverse setpoint too high.

The Peak tonnage reverse setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

2) Adjust the indicated setpoint to a setting less

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 116 117

Sem comentários

Link-systems System 1100 Tonnage Monitor Manual do Utilizador Página 110