Link-systems OmniLink - PLC Interface Manual do Utilizador descarregar pdf (Página 40)

June 5, 2000 Man ual Rev 1 .0 5.13

Value:

Standard Numeric

Meaning:

The stopping time of the press in milliseconds the last time it stopped.

Section 5.7.29 Parameter 029 - Last Stop Position

Value:

Standard Numeric

Meaning:

0 = Did not stop at top.

1 = Stopped at top.

Section 5.7.30 Parameter 030 - Last Start Time

Value:

Standard Numeric

Meaning:

The starting time in milliseconds the last time the clutch was engaged.

Section 5.7.35 Parameter 035 - Peak Forward Tonnage (Channel 1)

Value:

Standard Numeric, 1 decimal place

Meaning:

The peak forward tonnage registered on this channel for the last hit. This value is in .1 tons. If

“Send Decimal Point” is “No” then the PLC must assume a decimal place of 1. For example:

12.3 tons will be sent as 123

25 tons will be sent as 250

Note that this is true even if the tonnage monitor itself does not show a decimal point on its screen.

Section 5.7.36 Parameter 036 - Peak Forward Tonnage (Channel 2)

Value:

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 52 53

Sem comentários

Link-systems OmniLink - PLC Interface Manual do Utilizador Página 40